Chordplay Guitars
🎸 HEAD & CAB 🎸 Ashdown Bass Amplifier Stack~Evo II 300 + ARM-410H Cabinet 4x10
🎸 HEAD & CAB 🎸 Ashdown Bass Amplifier Stack~Evo II 300 + ARM-410H Cabinet 4x10
Couldn't load pickup availability
STRICTLY COLLECTION OR LOCAL DELIVERY ONLY
Â
🎸ASHDOWN BASS HEAD & CAB DEAL🎸
Â
Both in excellent used condition with just minor wear, and fully working!
Â
Full descriptions below:
Â
Â
🎸PART EX WELCOME~ TRADE UP OR DOWN~ INTERNATIONAL DELIVERY AVAILABLE~ LOCAL COLLECTION/TRIAL AND LOCAL DELIVERY OPTIONS🎸
Â
The ABM 300 EVO II is a 325 watts RMS bass amp head designed to satisfy both bass-purists and tech-heads alike. Three straightforward rotary tone controls provide 20dB of cut and boost at 60Hz, 660Hz and 5kHz, and are supplemented by two pairs of additional sliders giving 15dB cut and boost at 180Hz, 340Hz, 1.3kHz and 2.6kHz. The EQ can be switched in/out, and flat/shaped by footswitch, enabling players to go from a flat fretless sound to a boosted sound via a favourite EQ setting.
Â
A single input is switchable for passive and active instruments with a blend of solid state and dual triode tube preamps stages which can be preset and selected by footswitch, providing access to a massive range of clean, warm and overdriven tones. Also footswitchable is the mighty Ashdown sub-harmonic generator which precisely tracks the main signal and reproduces it an octave lower. A sub-harmonic level control enables the player to add just the right amount of low-end reinforcement - everything from a subtle, thickening of the sound to unbridled, bone crushing tone.
Â
The ABM 300 EVO II features a front-panel mounted balanced DI out with pre or post EQ switching, a sub-bass output, a tuner output, an FX loop and a line input for the connection of an external sampler or sound source. Output muting cuts the signal from the DI output but leaves the tuner output 'live', allowing the player to tune up in silence. A new upgraded power section has faster transient attack, more headroom and even less noise.
Â
Specification
Â
Power Output 325 Watt
Power Handling 115/230V
Speaker Outputs Minimum impedance 4 Ohms
Frequency Response -3dB at 17Hz and 30kHz
High Instrument Inpput Impedance 3.9M Ohms Input Range 150mV - 20V p-p
Low Instrument Input Impedance 10k Ohms Input range 300mV to 40V p-p
Line Input Impedance 22k Ohms, inout level 0dBu
Sub Output Impedance 1k Ohms, Level 0dBu Nominal
DI Output 600 Ohms Balanced, level 0dBu nominal
Tuner Output Impedance 22k Ohms, level 0dBu
EQ
Bass +/- 15dB @45Hz Middle +/- @ 660Hz Treble +/- 15dB @7kHz
Effects send Impedance 22k Ohms, level 0dBu nominal
Effects return Impedance 22k Ohms, input level 0dBu nominal
H x W x D (mm)
134 x 474 x 315
Weight (kg) 12
Â
The ABM 410H is a 600 watt 8 Ohm bass cabinet combining 4 X 10" Ashdown BlueLine drivers with an HF tweeter in a precision tuned plywood cabinet.
Â
The cabinet is constructed from high-grade birch ply with properly screwed and glued joints, protected by a tough, buffalo leather cloth covering and chromed metal corners. Special Ashdown-designed metal handles are used in favour of inferior flip handles which can rattle after years of use.
Â
Ashdown BlueLine speakers are specially developed to achieve a superb balance of power, transparency and deep, controlled low end, without sacrificing any of the mid-band attack and high-end brightness that are so important in a modern bass sound.
Â
Configuration: 4 x10"
Power Handling 600w cont, 900 prog
Impedance 8 ohms
Frequency Response 70 hz- 20khz
SPL 103 db 1w/1m
H x W x D (mm) 790x720x530
Weight (kg) 36
Share














